When installing the PE compartment liner, we can use the nail to fix the large sheet of material on the wall of the warehouse, thus completely solving the problem of coal bunker blocking. Generally, it is not necessary to cover the entire warehouse. As long as the coal tapping section of the lower cone section of the coal bunker and the upper round silo section are lined with about 1 meter, the silo caused by the rat hole and the arching can be solved.

In use, we should pay attention to the first use of the PE compartment liner, after the silo material is stored to two-thirds of the entire warehouse capacity, and then unloading.

In operation, it is necessary to always keep the material in the warehouse of the material entering and closing the material, and always keep the material storage in the warehouse more than one-half of the capacity of the entire warehouse.

We also prohibit the material from directly impacting the PE compartment liner. The hardness of the various materials is different. The material and flow rate shall not be changed at will. If it needs to be changed, it shall not be greater than 12% of the original design capacity. Changing the material or flow rate at will will affect the service life of the liner.

The ambient temperature of the PE compartment liner is generally not more than 100 °C.