High density plastic sheet manufature
Advantage of high density plastic sheet:
The service life is higher than steel, and the wear resistance is 3 ~ 7 times that of carbon steel and stainless steel.
Low wear, low frictional resistance, self-lubricating (no lubricant required).
With impact resistance, the use temperature range is -169 ~ + 90 ℃.
With shock absorption，not susceptible to moisture in humid environments.
Light weight, impact resistance and small coefficient of friction.
Low water absorption
High density plastic sheet board has a very low water absorption rate, it is almost non-absorbent, does not swell in water, and has much less water absorption than nylon.
Thermal performance
The heat distortion temperature is 85 degrees, and the use temperature can reach 90 degrees under a small load. In special cases, it can be used at higher temperatures. Because ultra high molecular weight polyethylene is a very tough material, Therefore, its low temperature resistance is also very good. At -169 degrees, it still has a certain degree of ductility without signs of fracture.
Non-toxic
The high density plastic sheet board is odorless, non-toxic, odorless, non-corrosive in nature, and has physiological characteristics and adaptability. The Food and Drug Administration allows it to be used in contact with food and drugs.
