Black UHMW Sheet
Excellent wear resistance, good low temperature impact resistance, self-lubricating, non-toxic, water and chemical resistance, heat resistance is better than general PE, the disadvantage is low heat resistance (heat distortion temperature), processing and forming Poor, outer surface hardness, rigidity, creep resistance is not as good as general engineering plastics, the expansion coefficient is too large. UHMWPE has poor fluidity and high viscosity in molten state. It is a rubber-like high-viscosity elastomer. It can only be formed by pressing and sintering at an early stage. It can also be processed by extrusion, injection molding and blow molding.
- Materials: Reprocessed UHMW PE
- Standard Size: 1220*2440mm, 4*8 ft
- Processing Method: Mould Pressing
- Thickness: 8mm~200 mm
- Density: 0.94g/cm3
- Molecular Weight: 6,000,000
- Water Absorption Rate: <0.01%
Black UHMW Sheets Features:
- Incredible high abrasion resistance and wear resistance;
- Excellent impact resistance at low temperature;
- Good self-lubricating performance, non-adherent surface;
- Unbreakable, good resilience, Super resistance of aging
- Odorless, tasteless, and nontoxic;
- Extremely low moisture absorption;
- Very low coefficient of friction;
- Highly resistant to corrosive chemicals except oxidizing acids.
Production Techniques and Equipment
Our uhmw sheets are made by moulding press, thickness 8mm~300mm. Comon full size of per sheet is 4*8ft (1220*2440mm). We offer customize service, UHMW Sheets can be cut to any size as customer’s requirement.