High Density Polyethylene Plastic Sheets
High-density polyethylene plastic sheet has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. Dielectric properties and environmental stress crack resistance are also good. Hardness, tensile strength and creep are better than low density polyethylene; wear resistance, electrical insulation, toughness and cold resistance are better, but slightly lower than low density insulation; good chemical stability at room temperature Under the condition, it is insoluble in any organic solvent, resistant to corrosion by acids, alkalis and various salts; the film has low permeability to water vapor and air and low water absorption.
- Materials: Virgin UHMW PE
- Standard Size: 1220*2440mm, 4*8 ft
- Processing Method: Mould Pressing
- Thickness: 8mm~200 mm
- Wear Rate: 0.3~0.45
- Density: 0.94g/cm3
- Molecular Weight: 6,000,000
- Bending Strength: 30 Mpa
- Water Absorption Rate: <0.01%
- Abrasion: 0.015g
High Density Polyethylene Plastic Sheets Features:
- Incredible high abrasion resistance and wear resistance;
- Excellent impact resistance at low temperature;
- Good self-lubricating performance, non-adherent surface;
- Unbreakable, good resilience, Super resistance of aging
- Odorless, tasteless, and nontoxic;
- Extremely low moisture absorption;
- Very low coefficient of friction;
- Highly resistant to corrosive chemicals except oxidizing acids.
Production Techniques and Equipment
Our uhmw sheets are made by moulding press, thickness 8mm~300mm. Comon full size of per sheet is 4*8ft (1220*2440mm). We offer customize service, UHMW Sheets can be cut to any size as customer’s requirement.
